What is the easiest way of measuring that HP?
Obviously the horspower is being transferred to the air, not the aircraft,
We
can measure thrust on the aircraft, which relates directly to HP. We can
measure the kinetic energy of the air, which relates directly to HP, There
are quite a few indirect means available to us.
I am reminded of a story/joke I once read a really long time ago (I think
I
was in high school). It has to do with how one might use physics to answer
a
question. I typed the story out as I remember it. It got quite long, too
long
to clutter you your email inboxes. But if you want to read a little (very
little) physics humor, you can check it out. I posted it at
http://poplar.us/TallBuildingQuiz.doc
Robin
Have been following the chat with interest. What if you go back to tying
airplane to the tree and adding a load senser to the mix like they have on
cranes, then you would have a reading in lbs. Any changes you do to the
engine could be measured similar to dyno testing if your really poor like
most of us
Wally in Canada
Static thrust is not the whole story. What you are mainly interested
in is HP in the climb mode and low fuel burn for cruise or MPG.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.