Looking for flex plate, counter weight and a front cover that supports a
tooth wheel instead of a CAS. Thanks for any help
Joe Berki
13b 2nd gen
Joe,
You can buy a front cover for an rx7 FD off of Ebay. I bought a cover,
but I haven't been able to find the pick up modules or toothed ring. I
may
end up just keeping my original CAS because I don't really understand how
to
convert into the other system and run Tracy's EC3 with it (although Tracy
said it will work fine). I think I will have to make a custom toothed
wheel for my 20B anyway and then try to figure out how to mount multiple
CAS
modules at proper locations around the toothed wheel......but I haven't
really jumped into it much yet. I need a good "20B Aircraft Conversion
for
Dummy's" book !!!
Don
If the toothed wheel mentioned is the Renesis trigger wheel, I have one you
are welcome to
for the cost of postage.
Hurant Karibian
--
Karibian
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.