Subject: Wanted to buy 13b parts
From: Rotary Engine
Date: 3/3/2010, 8:29 PM
To: AAA Put this in the To box


Looking for flex plate, counter weight and a front cover  that supports a
tooth wheel instead of a CAS.  Thanks for any  help

Joe Berki
13b 2nd gen

Joe,

You can buy a front cover for an rx7 FD off of  Ebay.  I bought a cover,
but I haven't been able to find the pick up  modules or toothed ring.  I
may
end up just keeping my original CAS because  I don't really understand how
to
convert into the other system and run Tracy's  EC3 with it (although Tracy
said it will work fine).  I  think I will have to make a custom toothed
wheel for my 20B anyway and then try  to figure out how to mount multiple
CAS
modules at proper locations around the  toothed wheel......but I haven't
really jumped into it much yet.  I need a  good "20B Aircraft Conversion
for
Dummy's" book !!!

Don


Don,
            Check with Tracy Crook at Real World Solutions. He is flying an
RV8 with a 20B installed, check out his website
http://www.rotaryaviation.com/RV8Project.htm
James Ealey


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.