Paul,
Where is the development for the simple EFI at?  I am currently set up with
a Ford MAF but the latest is that they ar non-linear.  So I find the
algorithim then build a signal conditioner to accomplish linearization. Yea,
right.  The last thing I remember is the group was discussing going after a
DOS approach to the injection thing.  Appreciate any input.
Joe berki
Limo EZ


Don't use the Ford MAF. It is indeed non linear. Just use the same
$10 Free Scale manifold pressure sensor part Tracy is using.
Everything will work fine. Especially since we discovered a problem
with where people were attaching the pressure sensor. In other words
all over the place. The best and most stable place to measure the
manifold pressure is the oil injector hole. Particularly with a slide
throttle and a P-port.

You can probably sell the Ford MAF on ebay.

Paul Lamar