snip...
Mark
Sounds like it. Right after landing with the flaps down
it is easy to skid the tires as the wings support the weight.
If the take off speed is 65 MPH then the load on
the tires at 32 MPH is 3/4 of the gross weight. It is a good
sign if you can skid the tires then.
Assume Mark can lock the wheels at zero speed so I will
ask the question again. How much net out of the prop HP is
Mark's engine generating? Assume the coefficient of friction
between tire and pavement is one.
No guessing allowed. Show me how you calculated it.
Paul Lamar
Hi Paul,
2080# divided by 3 feet (72"/2) to get net lb ft. = 693 LB FT
693/2.85(psru) =243 LB FT at the engine
243 * 7500/5252 = 347 HP
To skid the airplane needs more so 350HP
Dale Davies
I don't follow you.
Where is the 72 inches coming from?
I assume the 2080# is the weight of the aircraft.
Paul Lamar
If one horsepower is 550 lb*ft/sec. then, in theory, with 1400 pounds
on the mains and a mu (co-eff. of fric.) of 1 it should take a little
more than 2.5 horsepower to skid the airplane 1 ft. / sec.
Makes sense. I can see a 3 hp. Briggs with a gear box dragging a 1400
lb load. Car winch is another example.
Chris Cosman
Zero speed!
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.