Subject: building cowl molds from step files
From: Rotary Engine
Date: 3/6/2010, 2:38 PM
To: AAA Put this in the To box



  After you have designed your cowl using a 3D program
  how do you go about building it?

 Paul Lamar

 I load it into my CAM program... after a hr or so of work I take
a USB
 chip out to the shop. Load it into my machine.. hit "Cycle
Start" and
 magically... several hrs later there is a cowl there :)..

 Ok so there are some additional steps in assembling a foam block
 and what not but thats the basics.

 I've got a foam block going on it today that is 30" wide x 90"
 long and ~30" deep..

 will soon be a Cargo Pod mold/buck for a Super Cub.

 Jarrett

 We should all be so lucky :)

 Paul Lamar

 I don't do just my own projects on it.. it's there to help
others.. :) I've got a website
 [still needs to be updated] but shows some of the nesc details.
 www.innovention-tech.com
 Jarrett
 What would you charge for an RV10 cowl buck?
 Paul Lamar

Are we talking a one off foam buck over which the fibreglass would
be laid up or a
full buck ready to pull a production mold?

Jarrett

What is the difference? Is it surface finish?

Paul Lamar


Yes and no, on a 'lost foam' buck there would be a foam finish. On a Production mold Buck
there would be polishable surface finishing materials as well as a final surface cut.

Basically the same thing but the surface is recut, smoother and polish/waxable.

Jarrett


OK mold quality. How much?

Paul Lamar.


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.