Subject: building cowl molds from step files
From: Rotary Engine
Date: 3/6/2010, 6:35 PM
To: AAA Put this in the To box



 After you have designed your cowl using a 3D program
 how do you go about building it?

Paul Lamar


I load it into my CAM program... after a hr or so of work I take a USB
chip out to the shop. Load it into my machine.. hit "Cycle Start" and
magically...  several hrs later there is a cowl there :)..

Ok so there are some additional steps in assembling a foam block
and what not but thats the basics.

I've got a foam block going on it today that is 30" wide x 90" long and
~30" deep..

will soon be a Cargo Pod mold/buck for a Super Cub.

Jarrett

We should all be so lucky :)

Paul Lamar

Jarrett,

I, and I'm sure many others on here would be interested in hearing more
about your "machine", it sure sounds big if it can handle a depth of 30".
Could you provide some details and pics, size, manufaturer, software etc. I
starting work on my own "machine" and am very keen to learn as much as
possible before I'm too involved.

Thanks,

John




-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.