Subject: building cowl molds from step files
From: Rotary Engine
Date: 3/6/2010, 8:35 PM
To: AAA Put this in the To box


After you have designed your cowl using a 3D program
how do you go about building it?
Paul Lamar


 I load it into my CAM program... after a hr or so of work I take
a USB
 chip out to the shop. Load it into my machine.. hit "Cycle
Start" and
 magically...  several hrs later there is a cowl there :)..
Ok so there are some additional steps in assembling a foam block
 and what not but thats the basics.
I've got a foam block going on it today that is 30" wide x 90"
long and
 ~30" deep..
will soon be a Cargo Pod mold/buck for a Super Cub.
Jarrett


We should all be so lucky :)
Paul Lamar

Jarrett,

I, and I'm sure many others on here would be interested in hearing
moreabout your "machine", it sure sounds big if it can handle a
depth of 30".
Could you provide some details and pics, size, manufaturer,
software etc. I
starting work on my own "machine" and am very keen to learn as
much as
possible before I'm too involved.

Thanks,

John


John, I've mentioned it a few times.  It's 20 x 10 ft, the 30" was a typo.. it'd got a ~26" of Z travel currently [the block of foam I'd mentioned is actually just over 20" deep, @ 30" a Super Cub would be sitting up on the cargo pod <off the tires  :) ], but I'm changing that out to close to 40" this summer [time permitting] in that process I'm also going to move up to a 5 axis system w/ an ATC spindle.

It's all self built [my day job is industrial design] and it was a long road..

Controlled by Mach3 and DC servo drives.

You can see a couple vid's of it cutting here..

http://www.youtube.com/watch?v=nQytmfvUc7M

Fwiw

Jarrett



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.