Subject: Transonic fuel injection....not a new idea!
From: Rotary Engine
Date: 3/10/2010, 11:24 AM
To: AAA Put this in the To box


Something to look at and think about.
http://www.tscombustion.com
jofarr, soddy tn

A lot of BS with no real info :)

Paul Lamar

More like a bunch of guys with ideas, but sadly their BoD doesn't
quite realize the market place for their injection system.

Lots of great R&D is taken from old technology, applying modern
electronics and materials, then producing a new product.

1% inspiration, 99% perspiration.....

This is from their web site. I suspect a group of High School
kids could have written something much better,
but translated is "you just don't understand what we are
doing, but send us more money and we will make you rich"....


Quote
Transonic's breakthrough high energy
efficiency, low carbon footprint solution disrupts the stagnant
efficiency trajectory of the internal combustion engine over the past
100 years. Our lean combustion process utilizes lean air-to-fuel ratios
that minimize many of thermal efficiency losses from today's engine
technology. Transonic's precision controlled fuel injection systems
address these issues to dramatically improve the efficiency and halve
the emissions of modern internal combustion engines./End Quote

You got to be kidding quote
When implemented, our transformational technology utilizing
supercritical-state fuel will radically shift the technological benefits
of the automotive internal combustion engine. The specific details of
our patented technology are highly proprietary and reviewable only
under Non Disclosure Agreement.
End Quote

Paul -- This is some fun reading (one of their patents..... wonder
how much they got from the VC folks?)
http://www.patentgenius.com/patent/7444230.html

Tom W

Right on Tom.

That non discloser stuff is so typical of the scam artist.
It make it near impossible to discredit the technology publicly
short circuiting the scam. If they do have something new
let them apply for a patent.

Paul Lamar


First, super critical direct injection is an interesting idea. It works by preheating the fuel, under pressure, until the heat energy in the fuel is enough to flash vaporize it when the pressure is released. This produces a cloud of vaporized fuel that is as hot as the pre-injection pressure and temperature allow it to be.

But here is the tricky part; How hot does the air in the cylinder have to be before you get combustion? If the fuel is hot enough, it doesn't matter. It will burn as soon as the oxygen is available. But mixing the fuel and air enough to allow combustion without cooling the fuel so much that it doesn't burn is an interesting subject.

BUT, I have a problem believing it is that much more efficient than a Diesel cycle. It can get away with lower compression, of course, since the air doesn't need to be hot enough to start combustion. Maybe. One interesting possibility is that the combustion energy over time curve can be controlled by the rate the fuel is introduced into the cylinder. Smoothing out the combustion burn could have good effects, especially under low speed, high load conditions. It can't knock because there is no excess fuel to detonate. But again, that's similar to a Diesel.

Transformational? I doubt it very much :-)

Craig Taylor



Well Heck,

Way back in the 1980 an old NASCAR mechanic and popular folk hero
claimed to
do exactly that. Henry ("Smokey") Yunick one of my early hero's holds
or I
guess did until 2002 hold the patent for that process # US 4862859

Here is a thread better discussing the process and its merits

http://www.eng-tips.com/viewthread.cfm?qid=78116

http://www.rexresearch.com/yunick/yunick.htm

If you Google it you find out even more

Marc Wiese


 Shades of the POUGE 200 mpg carburator, Virg

Folks,

I need to run this "transonic" system by an old EAA homebuilder engineer bud
of mine. I will not name him or the projects without his permission, but the
company names and products he has touched many here would recognize. He is
not a huge web guy, so I may have to print it out or send him a link on this
transonic system.

Why? While discussing car emission systems a few years back, he told me he
had the simple solution. He then explained a project he worked on of which
he is a co-patent holder. The name he used of the fuel injection system was
"hypergolic injection". They were using high temperatures and pressures in
the fuel rail/injector. So that the fuel (how can I describe it) would
almost auto-ignite once direct injected into the air in the piston chamber.
The problem was (and is) creating a system like this under the hood of your
car given crash test etc.

I am curious as to how similar this system is to the one he worked on (eons
before the micro-chip was applied to fuel systems). If is is close in
concept, maybe this is not hocum after all. Note look at the names on the
board of directors, they do not look to me like those that would sully their
name over some snake oil idea.

My best,
Anthony

Billions have been spent on direct injection so far with little or
no benefit other than diesel engines that need direct injection
anyway. Tons of stuff has been tried including warming the fuel.
Porsche just went through the exercise yet again. Don't hold
your breath.

The R&D money would be better spent on turbo compound
which is a well proven technology. Proven to reduce the fuel
consumption 20% because it focuses on recovering some of the
largest  waste of fuel in the world. Well over half of the total
transportation fuel burned in the world today goes out the exhaust
as waste HP.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.