Hi Paul & Group,

I'm going to use the stock Renesis alternator on
my Bush Caddy project, but I can't find a supplier
for a larger pulley.  Does anyone know of a supplier,
or have any information on what other pulley might
work?  I have found sites that sell the eccentric
shaft under speed pulleys but I don't want to
change that pulley just the alternator.

Thanks,
Bob
Upstate NY

In the over all scheme of things the speed
of the alternator should be down on the list.
Have you some info that suggest the alt.
will fail if not slowed down?

Paul Lamar

I thought I read some time back on this site
that a under drive alternator pulley should
be used.  If that's not the case I'll use
the stock pulley, and save me some work.

TX,
Bob

I would use the stock pulley. The red line on the
RX8 is 9000 RPM. You won't get near that.

Paul Lamar