Hi Paul & Group,

 I'm going to use the stock Renesis alternator on
 my Bush Caddy project, but I can't find a supplier
 for a larger pulley.  Does anyone know of a supplier,
 or have any information on what other pulley might
 work?  I have found sites that sell the eccentric
 shaft under speed pulleys but I don't want to
 change that pulley just the alternator.

 Thanks,
 Bob
 Upstate NY

 In the over all scheme of things the speed
 of the alternator should be down on the list.
 Have you some info that suggest the alt.
 will fail if not slowed down?

 Paul Lamar

Bob,
I used a 4" alternator pulley from Canton Racing.
See
http://www.cantonracingproducts.com/cgi-bin/commerce.cgi?preadd=action&key=73-209

Mark S.
Austin

Mark is using a 20B which has a lower redline than the
RX8 engine.

Mark, how is the p-port sealing coming?

Paul Lamar