Paul

here are more pics of the part.....

I still have to machine in the O-ring groove in the top.......going to
Real Seal tomorrow to pick some up but cannot pop in the grooves until I
know the dims, that will take a couple of days, but it is getting done...

there is some hand die grinding at the port bend transition inside that
, be honest I do not have time to do....just some blending, not much,
anybody could do it.

I made 10 and will send soon....


You probably heard Dave Leonard made an off field landing in San Marcos
on Mission Blvd.  Made news here...all is good..I gather engine
quit............

jeff

Mission Road or Mission Blvd? He is going to catch it from his wife.


Paul Lamar

Looks like this is a rx-8 specific part; that flat vertical mounting
pad on the side of the water pump is sadly missing from the 13b.  I
don't suppose the rx-8 water pump would fit on a 13b end housing??
Really liking the inlet / outlet part...

Mark (Rocky Mtn High)

Somebody on here got an RX8 front cover and cut the pump
part off and adapted it to either a 3 rotor or 13B.
I would like to see some pictures.

Paul Lamar