Paul,
Do you have a PN for the O Rings that you used on the seal plates?
I want to use a couple on the other side of the slide throttle.
Do you have any pressure tap left?
If so How much?
Thanks
Joe Berki
Here is the part number on the seal plate O-rings.
Pressure taps are $20 each plus $5 for mailing.
The usual cash only.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.