Since i joined the group i know several of you are doing
some tig welding and i need some advise and comments
to find the cheapest unit and the appropriate one for
my project,i will have to weld my drive housing with
reinforcement gusset of 1/4 " thickness aluminum plate
and to 1/2 plate i found lot on the market true EBAY
and CraigLists.com.
I handle pretty good the acetylene torch , have
welded 2 chromemoly tubing Dafhne frames and with
a few practice i am convince i will be fine to
handle the tig welding.
As per some expert they say i will need minimum
250 amps for the 1/2" plate
Jean Prudhomme
Jean,
You do not want the cheapest welder you can find, especially to weld Al.
The low cost ones usually only have a 20% duty cycle. That means only 12
minutes per hour. To weld the 1/2" Al., I would look for a unit that gives
40 to 50% duty cycle. Cost likely $3000 and up a bit.
Dale Davies
Jean,
1/2" aluminum plate is the tough part. I have a Miller Syncrowave 250 that
would do it but it cost 3K+ when I bought it. If cost is your biggest
sticking point I would suggest looking into one of the inverter technology
welders from Miller or Lincoln. When looking be sure to mention the need
to weld
1/2" aluminum plate which may be too tough for them. You will need a water
cooled torch I'm sure. That isn't something that comes with the inverter
style welders from either manufacturer I believe. The Syncrowave products
are often sold in package deals which can often be negotiated on price.
That
may be your best bet, but don't think anything with the capability to weld
thick aluminum will be cheap. Note also that you will need at least a 50
amp 220 service in your shop.
Bill Jepson
Make sure the Tig Welder has High Frequency.
Henry.
Thank,s everybody i made my choice to the INVERTIG 201 and
there is an article regarding the unit
http://www.hemmings.com/hmn/stories/2008/08/01/hmn_feature21.html
Jean Prudhomme
Jean, I don't think you will be dissappointed in that choice. I took a one
day intro class
at HTP in Chicago, I was welding .025 al sheet butt welds within minutes.
(I confess to
having some previous welding experience). There is a lot of capability in
that machine.
All the settings may seem daunting at first, but they allow you to tailor
the heat for
very precise welds. That precision also makes it "easier" for the novice
to begin being
productive. Buy or aquire a pile of scrap metal of the alloys you wish to
work with, make
coupons (test strips) to practise on. Jeff will give you advise on any
projects, he not
only runs the business but is an experienced fabricator himself.
Work Safe!
C. Smith
C. Smith where are you located,i will be at Sun
And Fun next month do you think they will have a booth there??
Jean Prudhomme
Jean, I have not seen them at sun-n-fun, although they do advertise in EAA's
sport aviation and kit planes magazines.
Jeff runs a fairly small operation, with low overhead. Those booths at the
shows are an arm and a leg, I know, as I had a booth one year at air
venture. Try giving Jeff Noland a call at HTP. He will be happy to discuss
anything pertaining to the machine.
The big boys, like Miller usually have a big tent, with the opportunity to
try out the machines, and show prices, but a complete Dynasty DX AC/DC rig
is still a couple grand over the HTP-WC. However go ahead and use the miller
display, and play with a dynasty, ask them to set you up to weld some thin
aluminum. Ask questions about how the frequency and duty cycle controls
affect the penetration and cleaning. You will find it interesting. The HTP
has all the features of the Miller, except it's AC frequency range is a tad
narrower, and perhaps it may have a higher top end current. Otherwise they
are pretty much the same, just you pay more for the Miller name.
There might also be an EAA welding workshop there as well.
Best wishes.
C. Smith
Oh, I'm in Howell, MI. between Lansing and Detroit. Sorry, missed that the
first time.
C. Smith
GOOD EVENING C.SMITH
I GOT A GOOD NEWS I JUST PURCHASE A NICE TIG AND PLASMA 250 AMPS
SIMILAR TO THE INVERTIG 201
THEIR SITE IS
WWW.EVERLASTGENERATORS.COM/POWERTIG
THE MODEL IS 256LX BRIGHT NEW AT A VERY GOO PRICE
I WANT TO TO GO ON THE WEB SITE AND GIVE ME YOUR OPINION
Jean Prudhomme
Hey, Jean.
I have not heard of this company prior to this.
I looked over the information available on the website, reviewed the operators manual. On
paper it looks like it has greater capability than the HTP, at much less cost. I would
like to know the country of manufacture.
The warrenty is 5 years, but the check out and return period is 48hrs and 30 days.
It is difficult to judge quality from photographs on a website. I was able to actually
work with the Invertig prior to purchase, and had time to look over the hardware and see
the base of operations. The Invertig from HTP is made in Italy, I suspect the Everlast is
from China. Not to knock everything from China, but they have a reputation for counterfit
semi-conductors, and hit or miss quality.
I have been on record in this group as purporting the notion that cheapest may not always
be the best choice, and I subscribe to "you get what you pay for".
At first glance the torch supplied does not appear as robust as those I received from HTP.
I can not comment on much else, as I have no first hand experience, nor have I heard of
this machine from welding groups or forums.
If I were you, I would do some in depth internet searching on open forums related to
welding and fabricating, ask some questions if others have heard or have experience with
this equipment. Take testimonials on the retailers website with a grain of salt.
If you do go ahead with the purchase, be prepared to put the unit through it's paces in
the first 48 hrs of receipt. Have a bottle of argon, some electrodes, filler rod and test
material. If possible find a local skilled welder to help you with this evaluation.
As you unpack your machine, open the side covers and take a look inside, if not sealed
with one of those warrenty void if removed stickers. Look for loose connections and
unseated boards before you plug it in. Your electrode grinder should only be used for your
electrodes, nothing else, do not contaminate you grinder. Wear your helmet, long sleeves,
gloves.
Keep us informed how this works out.
C. Smith
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.