Subject: Long EZ Canopy Update and Cooling Question
From: Rotary Engine
Date: 3/24/2010, 4:08 PM
To: AAA Put this in the To box



Hey guys just an update.... The canopy is coming together, at least the front canopy...
Still working on the Rear.  I was thinking the other day about cooling, has anyone ever tried using the fuel tank as a heat sink for an Oil/Fuel cooler?  Wonder how that would trade at the airplane level for drag count.

Mike C.

Cool Mike.
Looks like the wings are over there on the left.
With a P-port that will be one speedy airplane.

What happens when you get low on fuel?

Paul Lamar
--
Yea I thought about the heat sink thermal rise as the fuel goes down but normally the max temp would be during takeoff and climb and come down during cruise... you would need a fuel air cooler that could be used to control the fuel temp's as fuel is burned off, if you used it all the time.  But if it were only used for Take Off and climb it might allow you to size the cooling system a little smaller and reduce some drag.  Just a thought.

Mike C.


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.