Hello P Porters,

How do you mount the block off plate to the center iron housing ( 2
rectangular holes)?  What do you do with the 2 holes located at the top
edge
of that housing.  I see that there are 2 small holes that are drilled into
the side of each of the holes at the top edge.  I could open them up and
tap
them so I could bolt the blockoff plate to the housing.  any help or
enlightenment would be appreciated.

Joe Berki
Limo EZ
P Port


I don't follow you Joe.  Got a picture?

I had trouble on one (could have been this one) and had to drill/tap a hole
below the intakes in order to be able to bolt the plate to the iron.  I
could take a picture later today if that would help.

Mark