Subject: Must See Events at Sun-N-Fun for Rotor Heads
From: Rotary Engine
Date: 4/14/2010, 9:20 PM
To: AAA Put this in the To box



I was disappointed to see that Mistral is NOT attending this year.
There is only the following on the http://www.sun-n-fun.org web site about rotary events,

Engine Workshop - demonstrations on Rotary.

Tracy Cooks "Install Mazda Rotary and other alternative engines" and "Flying the Renesis and other Mazda Rotary engines" forum.

If you know of any other rotary events or activities please respond.
If you want to show your rotary power aircraft let us know where you parked.

I am planing on attending Friday and possibly Saturday and would be happy to help out on any Rotary related activities.

See you at the show,
Erik Wahlstrom

They Have not been here for years. Everybody thinks OSH is a must.

Chuck Dunlap flew in from Arizona and it was the first time I got
to talk to him about trouble he has had with apex seals.
After long discussions with Ed Anderson, Chuck and Tracy we suspect
the problem was with worn out apex seal slots. Unfortunately the
subject is not covered well in most shop manuals. The slot wears
into a modified V-shape after many many hours so if you have high
time rotors you must check for this. A quick check is insert an apex
seal vertically and make sure it does not move back and fourth
more than  3/8th of an inch at the top. An improvement on this would be
a chrome plated slot IMHO.

I have heard of road racers gently hammering the slot to close it up and
then regrinding to 2 mm. The other trick is to grind it out to
3 mm and get a set of 3 mm seals. New rotors are about $400 from Mazda.

Paul Lamar @ Sun n Fun