Hi, I really enjoyed your 35 MPG rx-8, and I was wondering if instead of a
third smaller rotor if you could turn off one of the 2 rotors?
If you wrote an article and I couldn't find it I apologize.
Also, subscribe :)
Yes. The drawback is you still have the friction of the dead rotor.
Paul Lamar in Bartow
I'm really wanting the rx8 b/c of the unique engine, but I'm very worried
about its MPG as I'm still pretty young and getting my life set up. I'm
willing to learn mechanics though, and anything that could improve it's
MPG.
Thanks for the PDF :)
Lucas Huggins
==================================================
Seems like a huge effort with diminishing returns.
Now, correct me if I'm wrong, won't the collective rotor
housing become gas washed without ignition, nevermind the
friction of the dead rotor. I'd be more afraid of a scored
rotor housing or damaged apex seals and possibly corner seals
and unburned fuel in the oil.
Sure the rotor is still getting oil, but also unburned fuel.
You're asking for loss of compression. I'm not sure how piston
engines handle this problem but I'd venture to guess it has to do with
either:
1.) high pressure oil feeding the oil rings the compression rings
get washed and the oil control rings, well... control oil (scrape
the more viscous oil from the cylinder wall as the piston retreats.
or
2.) the engine computer neither fires the injector or spark on
the "killed" cylinder hence-- no fuel for the gas wash problem
(in our case, for the premix guys or the oil injection guys
alike-- either not enough oil as the fuel/oil mix was no
longer being injected or too much oil as it was no longer
being burned with lack of ignition)
The problem can be overcome with much effort, but then
when would we use it? In low power descents? Ground
idle mode? Flight idle? Low power economy cruise?
I'd leave it up to the engineer types to decide if the
proposition is worth it, but from where I sit-- I'd
leave well enough alone. Focus on cleaning up the
airframe for fuel savings at cruise.
Pick the low hanging fruit first.
William Mason.
We are mostly talking about cars here that use only 40 HP
on the freeway. The computer merely turns off the fuel injectors to one
rotor.
Paul Lamar in Bartow
My impression is that the recip engines that use variable displacement
(MDS) do so by turning off the fuel to some cylinders, AND by leaving
both the intake and exhaust valves closed. This actually reduces
pumping losses because the air in the cylinder acts as a spring
instead of a pumping medium. At least, that's how I understand it.
The rotary would need an exhaust valve (or throttle) of some sort to
accomplish this. And individual control of each throttle.
Matt-