Paul,

I saw some pictures of Scott Emery's turbo Mazda RV-8 under construction. He has a 4 port intake with a lower casting and welded in tubes to complete the assembly. Says he got the casting from you. Do you have anymore of those castings?

Mike Wills

I have one or two cosmetic rejects. You might have to tig weld on it. They are designed for the 4 port turbo 13B engine. You will be disappointed in the
HP generated if not turbo. They are also rather heavy compared to the P-port set up.

Jeff can knock out the p-port rotor housings lickey split on his NC mill.
Does a good job too. You should visit him in Escondido.

Phone 1-760-685-0880

cell 1-760-743-2790

jeff.doddridge@gmail.com

1312 Hamilton Lane

Paul Lamar