Paul,

 I saw some pictures of Scott Emery's turbo Mazda RV-8 under
 construction. He has a 4 port intake with a lower casting and welded
 in tubes to complete the assembly. Says he got the casting from you.
 Do you have anymore of those castings?

 Mike Wills

 I have one or two cosmetic rejects. You might have to tig weld on it.
 They are designed for the 4 port turbo 13B engine. You will be
 disappointed in the
 HP generated if not turbo. They are also rather heavy compared to the
 P-port set up.

 Jeff can knock out the p-port rotor housings lickey split on his NC mill.
 Does a good job too. You should visit him in Escondido.

 Phone 1-760-685-0880

 cell 1-760-743-2790

 jeff.doddridge@gmail.com

 1312 Hamilton Lane

 Paul Lamar

Paul


A couple of corrections

cell 1-760-685-0880

fax  1-760-743-2790

I do a great job.................

jeff

Remind me when I get back and I will update the web site.

Mike, here is what the castings look like.

Paul Lamar


Thanks Paul. Not real happy with my current intake so just looking at all of
the options. PP is an option as well.

Mike