Subject: P Port seal plates
From: Rotary Engine
Date: 4/20/2010, 3:46 PM
To: AAA Put this in the To box




Paul,

Applied duct tape and vasoline to the plate and screws.

Applied JB weld and tightened everything up.

Pulled it apart.

Next is the red RTV

Joe Berki
Limo EZ

Did you let the JB Weld harden first before pulling it apart?
I forgot to add that step to the instructions.

You might want to polish that tube or the O-ring might
not work.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.