Subject: Stainless steel grade?
From: Rotary Engine
Date: 4/21/2010, 12:08 PM
To: AAA Put this in the To box


Paul,

What is the recommended stainless steel grade for a Renesis exhaust?

Thanks,

Sandy McNabb
Renesis in a Glass Goose

Inconel :) Just joking of course. 321 SS is the best SS.
You can use cheaper 304 but you have to go up on the thickness and weight,
Inconel .049
321 SS  .065
304 SS  .090

Paul Lamar



If one were willing to spend the money would Inconel 625 be worth the
expense I wonder? Or would a thicker heavier 321 SS do just as well in your
opinion?

Jay

I am not sure about just as well but thicker 321  sure would be cheaper.
You just need the thick part on the first two feet. After that you can
go down on the thickness as the heat is rapidly dissipated.

Paul Lamar

Paul,

Having just finished fabbing up a tangential muffler from inconel 625, I was
surprised at the "affordability" of the various inconel 625 tubing bends on
ebay, as little as $21 per piece.  They sell for about the same as 321 SS,
so why not use the superior material?  Wondering if your exhaust system is
melting is not something you want to be worried about when cruising along at
15,000 msl.  Personally, I won't use anything else.

Mark S.
Austin


That is cheaper than Burns Stainless for 321 bends.
Is that .049 wall Mark?

I have been buying my tubing in the wrong place.
Can you tell us the source Mark?
Please send some pictures of the muffler.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.