Subject: Stainless steel grade?
From: Rotary Engine
Date: 4/21/2010, 2:02 PM
To: AAA Put this in the To box


  Paul,

  What is the recommended stainless steel grade for a Renesis exhaust?

  Thanks,

  Sandy McNabb
  Renesis in a Glass Goose

  Inconel :) Just joking of course. 321 SS is the best SS.
  You can use cheaper 304 but you have to go up on the thickness and weight,
  Inconel .049
  321 SS  .065
  304 SS  .090

  Paul Lamar



  If one were willing to spend the money would Inconel 625 be worth the
  expense I wonder? Or would a thicker heavier 321 SS do just as well in
 your
  opinion?

  Jay

  I am not sure about just as well but thicker 321  sure would be cheaper.
  You just need the thick part on the first two feet. After that you can
  go down on the thickness as the heat is rapidly dissipated.

  Paul Lamar

 Paul,

 Having just finished fabbing up a tangential muffler from inconel 625, I
 was
 surprised at the "affordability" of the various inconel 625 tubing bends on
 ebay, as little as $21 per piece.  They sell for about the same as 321 SS,
 so why not use the superior material?  Wondering if your exhaust system is
 melting is not something you want to be worried about when cruising along
 at
 15,000 msl.  Personally, I won't use anything else.

 Mark S.
 Austin


 That is cheaper than Burns Stainless for 321 bends.
 Is that .049 wall Mark?

 I have been buying my tubing in the wrong place.
 Can you tell us the source Mark?
 Please send some pictures of the muffler.

 Paul Lamar



Paul,

Yes, .049", various diameters.  Do a search for "inconel 625 bends" on Ebay
and you'll get lots of hits.

Mark S.


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.