Subject: 13 b drawings and source for 20B
From: Rotary Engine
Date: 4/22/2010, 10:35 PM
To: AAA Put this in the To box


  Paul,

  Do you happen to have drawings that we can download of the 13b (late
  model) that show all the major dimensions and the hole locations. It would
  really speed up our process to get ours mounted. We are designing our
 motor
  mount based on all the great info on your site. I would love it if when we
  are done you would give it a look-see to see what you think, if it's not
 too
  much to ask.

  thanks

  Lionel

  P.S. We are working in solid works because it's what we have

  Nothing that is that detailed. George Grimes might have
  something better.

  Here is what I have.

  It is zip so let me know if you don't get it.
  The next message you will receive will be the zip files.

  Paul Lamar



  Lionel, I have the bellhousing bolt locations and the tension bolt
  locations. They are from a coordinate measuring machine and checked with
  measuring an RX8 engine by dial caliper. The only front cover bolt
  locations I have are by dial caliper and are only accurate enough to do a
  pattern for the new aluminum end housing patterns. I don't have the stock
  motor mount hole locations from the side of the front and center housings.
 I
  will ry to attach some bell housing end dimentions downloaded from this
 site
  last year. I have a Cad drawing of the bolt locations of my aluminum
  housings which would include a lot of added bolt holes and extra
 belhousing
  flange bolts and I may have relocated something from stock when adding the
  extra 6 attach bolts. I can if needed post the tension bolts locations.
 What
  I export from Rhino4 is usually surfaces and solids in IGES and Step
 format
  which have a solidworks varient but solidworks doesn't translate text and
  dimensions. A JPEG is an unscalled picture but the dimensions would be
  readable.

  george grimes


 Thank You So Much!  Paul, these help a lot !  And George, I would love all
 of that, it is exacctly what we need.  After we are done I can send you back
 all our dimensions and then maybe we would be really close to a full set.

  As soon as I have pics I will post them for you all.

 thanks again

 Lionel

Lionel,  I will try to post a DXF of the other bolt locations. If you want
a copy of the 3D drawings of the aluminum side housings send me a mailing
address to          george_grimes7@yahoo.com        and I can mail you a
DVD.  The files are much too large and would jam up the newsletter
inbox.     I am taking this computer to the CAD store tomorrow morning to
try and get it to run my wide format printer. It will likely take 3 weeks
for them to get to it so I will be pretty much offline. I can check my yahoo
mail on my wife's computer every couple of days. I am doing a scaled up BD5
airframe for someone with two seats over the next few weeks with weight and
balance for a 3 rotor.
         Speaking of 3 rotors,  Bruce Turentine is concentrating on RX8
based 2 rotor firewall forward packages for utility class airplanes
(919-557-6512)  and has sold his 3 rotor parts to a friend of his named
Bryan Smith  at  rotorsports racing   465 russel farm road   kannapolis NC
28081   ph  704-933-6222      Bryan has done 3 rotor aircraft builds and is
involved with RX7 rebuilds.
The day I visited him he had 19 side housings lined up near the door to go
for lapping  ($60 plus shipping per surface)

george grimes


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.