Paul,

 Do you happen to have drawings that  we can download of the 13b (late
 model) that show all the major dimensions and the hole locations.  It would
 really speed up our process to get ours mounted.  We are designing our motor
 mount based on all the great info on your site.  I would love it if when we
 are done you would give it a look-see to see what you think, if it's not too
 much to ask.

 thanks

 Lionel

 P.S.  We are working in solid works because it's what we have

 Nothing that is that detailed. George Grimes might have
 something better.

 Here is what I have.

 It is zip so let me know if you don't get it.
 The next message you will receive will be the zip files.

 Paul Lamar



Lionel,    I have the bellhousing bolt locations and the tension bolt
locations. They are from a coordinate measuring machine and checked with
measuring an RX8 engine by dial caliper.  The only front cover bolt
locations I have are by dial caliper and are only accurate enough to do a
pattern for the new aluminum end housing patterns.  I don't have the stock
motor mount hole locations from the side of the front and center housings. I
will ry to attach some bell housing end dimentions downloaded from this site
last year. I have a Cad drawing of the bolt locations of my aluminum
housings which would include a lot of added bolt holes and extra belhousing
flange bolts and I  may have relocated something from stock when adding the
extra 6 attach bolts. I can if needed post the tension bolts locations. What
I export from Rhino4 is usually surfaces and solids in IGES and Step format
which have a solidworks varient but solidworks doesn't translate text and
dimensions. A JPEG is an unscalled picture but the dimensions would be
readable.

george grimes