Subject: Mazda Lemans , P Port sealing
From: Rotary Engine
Date: 4/22/2010, 4:29 PM
To: AAA Put this in the To box



Hi Paul & Group -

Is it in the public domain how mazda sealed the lemans periphiral ports to the
outside of the rotor housing? Are your sealing caps copied from that engine ?

Fly & Build good -
Bryan Wilkinson in Un - grounded England

Mazda sand cast special p-port rotor housings for racing.
Very expensive.

Paul Lamar

Paul,

Any chance you have the dimensions of the D ports in those special castings?
Can't quite see the exhaust shape in the pics.

Thank you!
Ed Carver

Don't have them Ed. Rather radical timing for 10,000 RPM or more.

Paul Lamar

Is the D shape beneficial for our use in an aircraft engine? Or can it simply not work reliably? I have read nothing on this issue. As soon as I learned about P porting, I considered D shape. But had no reference to usage. Too dangerous to try when round works well enough?...

Ed

It will work but it gives very little additional HP at 7500 RPM.

It is mainly designed to work at up to 11,000 RPM for racing
purposes for every last HP that counts. The big draw back
is it makes building the p-port rotor housing far more difficult
than merely welding in a new tube which is what we are now doing.
It is just not cost effective for our purposes.

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.