Paul,
Do you happen to have drawings that we can download of the 13b (late
model) that show all the major dimensions and the hole locations. It would
really speed up our process to get ours mounted. We are designing our
motor
mount based on all the great info on your site. I would love it if when we
are done you would give it a look-see to see what you think, if it's not
too
much to ask.
thanks
Lionel
P.S. We are working in solid works because it's what we have
Nothing that is that detailed. George Grimes might have
something better.
Here is what I have.
It is zip so let me know if you don't get it.
The next message you will receive will be the zip files.
Paul Lamar
Lionel, I have the bellhousing bolt locations and the tension bolt
locations. They are from a coordinate measuring machine and checked with
measuring an RX8 engine by dial caliper. The only front cover bolt
locations I have are by dial caliper and are only accurate enough to do a
pattern for the new aluminum end housing patterns. I don't have the stock
motor mount hole locations from the side of the front and center housings.
I
will ry to attach some bell housing end dimentions downloaded from this
site
last year. I have a Cad drawing of the bolt locations of my aluminum
housings which would include a lot of added bolt holes and extra
belhousing
flange bolts and I may have relocated something from stock when adding the
extra 6 attach bolts. I can if needed post the tension bolts locations.
What
I export from Rhino4 is usually surfaces and solids in IGES and Step
format
which have a solidworks varient but solidworks doesn't translate text and
dimensions. A JPEG is an unscalled picture but the dimensions would be
readable.
george grimes
Thank You So Much! Paul, these help a lot ! And George, I would love all
of that, it is exacctly what we need. After we are done I can send you back
all our dimensions and then maybe we would be really close to a full set.
As soon as I have pics I will post them for you all.
thanks again
Lionel
Lionel, I will try to post a DXF of the other bolt locations. If you want
a copy of the 3D drawings of the aluminum side housings send me a mailing
address to
george_grimes7@yahoo.com and I can mail you a
DVD. The files are much too large and would jam up the newsletter
inbox. I am taking this computer to the CAD store tomorrow morning to
try and get it to run my wide format printer. It will likely take 3 weeks
for them to get to it so I will be pretty much offline. I can check my yahoo
mail on my wife's computer every couple of days. I am doing a scaled up BD5
airframe for someone with two seats over the next few weeks with weight and
balance for a 3 rotor.
Speaking of 3 rotors, Bruce Turentine is concentrating on RX8
based 2 rotor firewall forward packages for utility class airplanes
(919-557-6512) and has sold his 3 rotor parts to a friend of his named
Bryan Smith at rotorsports racing 465 russel farm road kannapolis NC
28081 ph 704-933-6222 Bryan has done 3 rotor aircraft builds and is
involved with RX7 rebuilds.
The day I visited him he had 19 side housings lined up near the door to go
for lapping ($60 plus shipping per surface)
george grimes
thank you so much George. I will send off that adress toyou right now.
Lionel
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.