Subject: Turbo Compound at automotive power levels.
From: Rotary Engine
Date: 4/23/2010, 5:46 PM
To: AAA Put this in the To box


This is based on automotive power levels around 40 HP on average
from the engine.

http://www.greencarcongress.com/2005/09/tigers_exhaust_.html


"Typically the 800º C (1472 F) gases have a velocity of 60m/s (134 MPH).  and a mass flow rate of 0.05 kg/s,   (6.6 Pounds per minute)  providing enough energy to spin the generator at up to 80,000 rpm and create electrical power of up to 6kW  (8 HP)"

http://www.foresightvehicle.org.uk/dispproj1.asp?wg_id=1145

If it were indeed 40 HP this would be a 20% increase in power
(8/40) and a corresponding reduction in BSFC of about 20%
assuming 100% recovery.

An off the shelf GM belt drive starter generator could
be used to assemble a complete electric turbo compound
engine with a penalty of a 36% reduction in recovered
exhaust energy due to 80% motor/generator inefficiency. In other
words only 5 HP would be recovered from the exhaust rather
than 8 HP. This would be a 45/40  12% increase in power and
a corresponding reduction in BSFC of 12%. Still a remarkable
number as improvements in BSFC go.

No turbo charger gear box required.

The up side is it is nearly off the shelf and will
work over a wide range of power levels.


Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.