Subject: Turbo Compound at automotive power levels.
From: Rotary Engine
Date: 4/24/2010, 5:20 AM
To: AAA Put this in the To box


This is based on automotive power levels around 40 HP on average
from the engine.

http://www.greencarcongress.com/2005/09/tigers_exhaust_.html


"Typically the 800º C (1472 F) gases have a velocity of 60m/s
(134 MPH).  and a mass flow rate of 0.05 kg/s,   (6.6 Pounds
per minute)  providing enough energy to spin the
generator at up to 80,000 rpm and create electrical
power of up to 6kW  (8 HP)"

http://www.foresightvehicle.org.uk/dispproj1.asp?wg_id=1145

If it were indeed 40 HP this would be a 20% increase in power
(8/40) and a corresponding reduction in BSFC of about 20%
assuming 100% recovery.

An off the shelf GM belt drive starter generator could
be used to assemble a complete electric turbo compound
engine with a penalty of a 36% reduction in recovered
exhaust energy due to 80% motor/generator inefficiency. In other
words only 5 HP would be recovered from the exhaust rather
than 8 HP. This would be a 45/40  12% increase in power and
a corresponding reduction in BSFC of 12%. Still a remarkable
number as improvements in BSFC go.

No turbo charger gear box required.

The up side is it is nearly off the shelf and will
work over a wide range of power levels.

----------------------------------------------

I finally found some more info on the TIGERS.
It is beginning to look more real.
http://www.cpowert.com/products/tigers.htm


TIGERS is currently in the proof of concept hardware test
phase and is expected to be production ready by 2012.
Specification Summary
Maximum Speed     80,000rpm
Maximum Shaft Power     6kW
Generating efficiency @ 14.6V     >70%
Generating efficiency @ 340V     >90%
Bearings     Sealed for life rolling element
Total system weight     ~ 10kg  (22 pounds)
Overall machine length     ~ 150mm
Cooling system     Engine coolant
Applications/Benefits

* More efficient electrical power generation compared
with a conventional alternator at medium to high engine load

* Waste exhaust heat energy is converted into useful electrical power
* Compact machine (150mm cube) delivering high power (4.2kW @ 14.6V)
* Can be packaged anywhere in the exhaust system
* Production ready design will have fully integrated
power & control electronics

* Fully controllable, full flow by-pass
* Ideally implemented in conjunction with ‘power hungry’
vehicle electrical consumers to deliver a larger overall
fuel consumption reduction

Controlled Power Technologies Ltd
Unit 4 Westmayne Industrial Park
Bramston Way
Laindon
Essex SS15 6TP
Tel +44 (0) 1268 564800


This would bump the RX8 up to 28 MPG in the freeway cycle.
In hybrid mode, as most of the parts are the same,
probably a higher MPG number in the city cycle as well.

Don't get the wrong idea. I don't for a minute believe
CO2 is a pollutant. Current concentrations are a long way from
being toxic to humans. If anything the concentrations in the
atmosphere are too low for optimum plant growth. An extrapolation
of the rate of increase is meaningless as there are always feedback
mechanism in play.

I am only interested in improving the MPG.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2009 All world wide rights reserved.