I suggest if you are interested in this system you make
a folder and drag over all the many future messages on this
subject otherwise delete it.

I picked up the PC board from Don Kinser himself on last Friday
in Beverton OR. He answered a couple of questions I had.

Don wrote the basic compiler himself so he is the guy that also
answers all the questions. Obviously a very small company
and very easy and quick to give support. A huge advantage for you.

I had the free Integrated Development Environment installed and running
in less than five minutes. It is as easy as QB.

I wrote and compiled this program in another minute.
It is a time delay routine. I sent this jpg
screen shot off to Don with a question about the error.

This is one 1/100th of the time I needed to get the
Motorola 68xx IDE up and running.

This is going to be easy and quick. You will read about
it step by step. I'll power up the board tomorrow
and measure some of the times to the nearest micro second
it takes to do things like read the analog to digital converter
connected to the manifold pressure sensor.


http://www.zbasic.net/

So simple a caveman like me can do it.

Paul Lamar