Subject: Atmel and ZBasic EFI and data acq-displays
From: Rotary Engine
Date: 5/12/2010, 8:54 PM
To: AAA Put this in the To box


 I suggest if you are interested in this system you make
 a folder and drag over all the many future messages on this
 subject otherwise delete it.

 We need some stand alone feed back info to the pilot on the
 instrument panel when no net book is present in the cockpit.

 I am thinking of using this low cost 3 inch wide by
 2.5 inches high 80 character display.

 It is 4 lines by 20 characters wide.

 That should be plenty of info for the pilot.

 The over all size of the box and panel cut out will be about 5 inches
 wide and 4 inches high with switches, netbook USB connector
 and a leaning knob below the display.

 What do you think? What engine info would you
 like to see on the display? Is the display large
 enough?

 RPM
 water temp
 oil pressure
 oil temp
 EGT
 fuel flow
 total fuel burned
 ???
 ???

 --------------------------------------------------

 More info on the display options.
 ZBasic is closely related to BasicX
 AKA BasicStamp.

 http://www.basicx.com/

 These have been used for years to control all sorts of
 things. Home built GPS driven auto pilot anyone?

 The main difference is; ZBasic supports a much
 more powerful 100 pin chip in the Atmel family.
 BasicStamps seem to be limited to the 40 pin versions.

 These are some of the display options that are easy to
 implement shown in the attached jpg.

 Get involved now and tell me what you like. Don't
 come back six months or a year from now after we have
 all the code and say: "Could I get a different display?"
 We will be making a front panel on an NC mill so the
 display chosen will fit that.

 The trade off is the amount of info you get compared
 to the ease of reading. The larger the display the better
 but it takes up panel space. I am leaning towards
 a 4 line 20 character wide display so we have more
 feedback info. We can get that 3 inches wide or six inches
 wide.

 What do you think?


 http://www.zbasic.net/

 So simple a caveman like me can do it.

 Paul Lamar

The display?   NITS?   sunlight readable?   I am a proponent of OLED for
sunlight viewing.  Perhaps it is my age, but my LCD instruments in
sunlight are worthless even at full contrast. The Atmel and ZBasic are
great.

Terry Adams

Got any web sites selling OLED Terry?

Paul Lamar

These are all good
http://www.osddisplays.com/oled.php
http://www.4dsystems.com.au/
http://www.sparkfun.com
http://www.liquidware.com/
http://www.femacorp.com/
http://www.parallax.com/Store

Terry

Thanks Terry. I'll take a look.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.