Dear Paul  is it possible to build a complete motor from
available suppliers,for my micro light a/c. 2 rotors would
be overkill I would think,leaving of course a single rotor.
You mentioned previously a  possible compound set up,using
a 10-1 reduction g/box,that really caught my interest ,have
you any further information on that aspect? I wholeheartedly
agree with you that although the piston engine is very good ,
it has had 150 years of development.In the short time I have
been following the Wankel engine, already a lot of improvements
have made given another few years,who knows.Yours sincerely

Robbie Nicholson.

Everybody that wants a 100 HP  24 KG, 35 KG (77 pound) with Hirth
gear box, rotary send email to my friend Poul Henrik Woelfle AIXRO <ph.woelfle@woelfle-engineering.com>-

If they get enough request they might market an existing engine in
the US.

Paul Lamar

Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.