Hi Paul,

 I am currently building a Cozy MKIV which I plan to use a NA 20b.  I
 am considering one of many fuel/ignition options.  One idea was
 using 3 synchronized Aeroconversions AeroInjectors (Aerocarbs...35mm
 90-125hp each).  One feeding each rotor.  What are your thoughts
 regarding this setup?  Thanks in advance.

 Best regards,
 Jim Tomaszewski

 BTW..your website is a great asset to the rotary homebuilder!  Great
 job!


 I think you would be giving away some HP. The engine would
 run of course. You could get about the same HP with a 2 rotor
 P-port. The 3 rotor P-port engines use 3 intake tubes
 with 2.76 square inches of intake area each.

 A 35 mm carb is 1.377" in diameter and only 1.49 square inches
 of intake area each.

 Paul Lamar

Jim,
  I have a 3 rotor build up by Bruce Turrentine I'm selling.  If
you're interested contact me off list at ccosman@comcast.net

Chris Cosman