I suggest if you are interested in this system you make
   a folder and drag over all the many future messages on this
   subject otherwise delete it.

   Paul,

  I did as you suggested, but didn't see any difference in the results.  I've
  attached a screen shot of the program after F7.

  Thanks for the help.  I'll stick with it as long as you're willing to tutor
  me.  ;-)

  Mark

  OK I think I see what the problem is.
  verbose only works if you are in a project.

  You are not in a project.
  Select the Project drop down menu
  Select new
  If the Directory is not what you want select change
  or browse.
  Type in a new project name.
  Then select OK.

  What will come is the editor that will look like this:
  Sub Main()
  End Sub

  Now select Options  Open Project File.
  It will look like this:
  ...name you gave it.bas

  Put in

  --verbose

  Select "save" under File.
  It will blink.

  Now go back and select the first tab... name you gave it.bas

  You can always tell if you have a valid project as you will see
  a tab with ......name you gave it.pjt

  Now put your program between Sub Main() and End Sub
  go from there and get back to me.

  Paul Lamar

See attachment

Mark

OK great Mark. I'll send this off to Don.
Do you have anything other than ZBasic running?

---------------------------------------------------
Don wants to know if your are running in Windows 7 or you
are running 64 bits?

He is obviously on line :)

Paul Lamar