Subject: Major break through in charge cooled engines.
From: Rotary Engine
Date: 5/27/2010, 10:45 AM
To: AAA Put this in the To box


  Poul Woelfle has his two rotor AIXRO running at 11,000 RPM
  and 130 HP. Probably weighs next to nothing. My guess is
  is less than 75 pounds not including the PSRU.
  The major breakthrough is Silicon Nitride rollers in
  the rotor bearings. Twice the operating temperature
  of steel rollers. Widely used in NC machine tool spindles and
  turbo chargers.

  The go cart world will never be the same.

  Poul has the squarest combustion chamber of any rotary on the
  market. That allows a super large p-port for better
  breathing at high RPM.

  http://www.karting1.co.uk/wankel-kart-test.htm

  The AIXRO supercharged engine holds the worlds altitude
  record for rotary engines at 27,000 feet.

  Austro Engines new AE75R scaled up Norton/Midwest based engine
  is very close to certification. It is 50% more displacement
  than the Norton. HP is 75 HP at 7000 RPM in one rotor form. Over 500 one
  rotor 50 HP engines have been sold for for Schhicher Motor Gliders.
  Engine core weight is 61.7 pounds. Fire wall forward with cooling
  system and coolant is 78.5 pounds.

  This would be great in two rotor form at 150 HP.

  Paul Lamar @ Aero


  Paul,

  I have been biting my tongue on this one and have been waiting for someone
  to bite. No one did.

  Doesn't anyone see this for the breakthrough it potentially is?

  By using the Ceramic Bearings my guess is they picked up a great deal of
  RPM's. I do not mean to put words in anyones mouth, but will this let
  AIXRO
  approach an "Oil Free" Rotary (a-k-a, Dr. Bryzik's (diesels in the 80's) ?

  Does anyone grasp the significance of that?

  In the Gas Turbine Arena significant time, money, and treasure have been
  spent on trying to develop Integral Starter Generator(s) and Oil-Free
  "Foil"
  bearings to in essence to eliminate 2 systems or integrate them enough to
  potential reduce nacelle diameter. Some of what has been done in the gas
  turbine arena falls into the do not ask what I do for a living type of
  stuff, but that is ok. But the point is, in terms of Rotaries is this,
  (could this) adaptation of Ceramic Bearings be the (or a) key feature to
  getting a "Charge Cooled" engine (Like Eric Barger's Rotamax) to truly
  leapfrog other engines and work by reducing thermal loads on other heat
  sources other combustion?

  On a tangent question, has anyone ever thought of utilizing these coatings
  for further reduction in friction and again eliminate the load or reduce a
  system entirely?

  http://remsuperfinish.com/rem/isf_vs_friction.html

  http://www.microblueracing.com/

  Am I thinking way to out of the box here, but is an "Oil Free" Rotary a
  possibility?

  My best,
  Anthony J. Liberatore

  Why bother? What does it buy one?

  What this really is.... is a cost breakthrough.
  You can get 11,000 RPM with pressure fed plain bearings
  but that adds to the cost and will take some time
  to achieve in 100 HP rotaries for the LSA market.

  This is here and now and can be implemented by a
  number of small rotary engine makers on existing
  charge cooled rotor designs.

  Too bad Rotomax did not try it. They might still be here.
  I suggested it to them.

  Paul Lamar


  Paul,

  Can you imagine putting two of these engines on a Cri-Cri? Awesome!

  Mark

  2 one rotor engines or two 2 rotor engines? :)
  A 200 HP Cri Cri? :)

  http://www.cricri.zoomshare.com/

  Paul Lamar



  Two one-rotor Aixro engines for a total of 96 hp. The Cri Cri is so light
  it would perform like a fighter jet.

  Mark



 I owned two Cri Cri's several years ago.  Flew them often.  Hated the JPX
 engines, but
 nothing else worked.  Second Cri Cri used limbach 275E motors, tuned to 20
 hp at 5600 rpm.
  Key issue was weight.  Budgeted 15 pounds per engine, thirty total.  The
 little rotary
 looks great, and 90+ hp would certainly make a rocket out of the tiny Cri
 Cri, but it is
 still very heavy for the plane.


 Lewis Bjork


 If you eliminate the heavy two engine mounting structure on the nose and
 mount a single AIXRO with Hirth gear box with the same thrust line I think
 you
 can get the engine weight in the ball park. If you use a Hirth gear box
 over 3:1 and ceramic rotor bearings you can run the AIXRO at 8000 or 9000
 RPM for take off so you can get over 55 HP. Here are a bunch of files so
 you can load into your 3D program to see what it would look like. Build
 it to plans except for the dual motor mount.

 Paul Lamar


 Paul,

A hangar neighbor has a Quickie Q-200 that needs reassembly, and a new
engine.  I've been passing rotary info to him over the last 6 months. The
AE75R sounds like a good match to me.  Some builders have installed O-200's,
so this seems to be a better match.  What do you estimate the fwf weight to
be for the AE75R?

Mark

The AIXRO  two rotor weighs 75 pounds with Hirth Gear box
and the O-200 weighs about 200 pounds so I think he might have an aft
CG problem :) Nothing a longer motor mount and cowl would not handle.

I think the AIXRO is more real and obtainable then the Austro AE75R engine
product. Austro engines does not want to sell to individuals.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.