Subject: Lime Rock Rolex GT race
From: Rotary Engine
Date: 6/1/2010, 12:50 AM
To: AAA Put this in the To box

Mazda p-port three rotor powered RX8's finish
1st, 2nd, 3rd and 4th. One of the great
strengths of the rotary is it's high power
to weight ratio. This results in a lighter
weight race car that is easier on tires and brakes.

One of the unintended consequences of a race series
where they "adjust" the performance of the cars
by ballast or rev limiters, to keep everybody
competitive, is the lowest cost car to race soon
becomes the majority. It has happened here.

It cost only $8000 to overhaul an RX8 race engine
and they last several races if not the whole
season. Piston engines required very expensive
over hauls after every one or two races if they
are lucky.

Something like seven or eight RX8's were entered
out of a field of only say 12 or 13.
The rest were almost all different brands.
Corvette, Porsche, BMW and Camaro.
The official Porsche factory team dropped
out because they could not compete with
the RX8's and their $100,000 engines.

I wonder when Mazda is going to wake up
and put the three rotor in the RX8 street car
or the two rotor in the Miata.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.