Subject: Lime Rock Rolex GT race
From: Rotary Engine
Date: 6/1/2010, 4:25 PM
To: AAA Put this in the To box


 Mazda p-port three rotor powered RX8's finish
 1st, 2nd, 3rd and 4th. One of the great
 strengths of the rotary is it's high power
 to weight ratio. This results in a lighter
 weight race car that is easier on tires and brakes.

 One of the unintended consequences of a race series
 where they "adjust" the performance of the cars
 by ballast or rev limiters, to keep everybody
 competitive, is the lowest cost car to race soon
 becomes the majority. It has happened here.

 It cost only $8000 to overhaul an RX8 race engine
 and they last several races if not the whole
 season. Piston engines required very expensive
 over hauls after every one or two races if they
 are lucky.

 Something like seven or eight RX8's were entered
 out of a field of only say 12 or 13.
 The rest were almost all different brands.
 Corvette, Porsche, BMW and Camaro.
 The official Porsche factory team dropped
 out because they could not compete with
 the RX8's and their $100,000 engines.

 I wonder when Mazda is going to wake up
 and put the three rotor in the RX8 street car
 or the two rotor in the Miata.

 Paul Lamar


 Yo Paul...how much Mazda stock do you have anyway? Agreed
 tho the 3-rotor is a slick motor. I drove the BFG Spice-Mazda
 at Daytona 24, and Riverside, and did some skid pad work
 with it.
 Another significant advantage is the resultant low vehicle cg.

 Ron Grable

 No stock. I thought Wankels were a good idea when I first heard
 about them. My wife and I ordered a NSU Wankel Spyder to be
 picked up in Europe and drive around for awhile back in
 the mid 60's.

 Jim Hall called me up and offered a job. Naturally I canceled
 the Spyder and the Europe trip and moved to Midland Tx. Good thing
 too as the NSU cracked the rotor housing right through
 the spark plug hole :)

 Then I bought six Mazda's rotaries over the years. Rx2, Rx4,
 13B Cosmo, two first gen RX7's and now an RX8.

 I had already bought a sail boat and went cruising for a couple
 of years down south. 98% boring and 2% we are going to drown.
 Came back sold the boat and started new businesses in the mid 70's.
 Second computer store in the world was one of them.

 When I retired 12 years ago I needed something to do
 other than play golf or watch TV. So I took up putting
 Mazda rotary engines in aircraft because they needed them.

 Paul Lamar

 Paul...I remember your 'puter store well.  You sold me my first 'puter--a
Kay Pro.

Ron

You and Csaba among others. Csaba still bugs me because the Kay Pro printer
interface did not work :)

Paul Lamar



We had a Kaypro 4 while growing up.  It had a daisy wheel printer
attached to it.  It worked very well for printing school reports typed
up in Wordstar.   ;)


Matt-


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.