Subject: Thermal couple amps for EGT
From: Rotary Engine
Date: 6/3/2010, 12:30 PM
To: AAA Put this in the To box

Here are a couple of chips to use as thermal couple (EGT)
amps.

http://www.analog.com/en/sensors/analog-temperature-sensors/ad595/products/product.html

This one has a thermal couple failure alarm built in. No computer
required.

.01 volt out per degree C so 1000 C would be 10 volts.

1800 F is 982.2222222 degree Celsius
We would need a resistor divider to get it down to 5 volts
max. Unless of course there was a way of scaling the output.

I'll have to fool with it on the stove :)

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.