Subject: A couple of things EGT and RPM. 2
From: Rotary Engine
Date: 6/4/2010, 1:06 PM
To: AAA Put this in the To box



 Mark,

 A couple of things. That EGT amp I mentioned has a failure
 alarm. That bit can be used to light an LED on the instrument
 panel or horn and used to switch in a back up EGT probe automatically.

 I am doing a PC board on the RPM counter. I'll have a few
 for sale as there is a minimum buy.
 Good to plus or minus one RPM in .6 seconds.
 Pickup required on the flywheel.

 One scenario is use it as an accelerator pump. If the RPM is
 going up rapidly (determined in .6 second) go to full rich
 over riding the EGT auto tune.

 It could also go to full lean if the RPM
 was dropping. Be careful there as the engine could
 be running out of gas or something else failing :)

 Paul Lamar

Paul,

Just a question... I know that you enjoy this sort of project, and that is
great, but for simplicity and expediency sake, is there something already
built that we could use, sort of like Perry Mick did?  Just a thought.

Mark
(Received my QBasic for Dummies book... look out!)


Perry used a stock EFI from a 2nd gen RX7 and tricked it to work without
some required inputs. As of a couple of weeks ago when I talked to
him in Oregon he still had not got it to lean. Not that... that
is impossible it just takes some more R&D on his part.
My estimate is around 160 to 180 HP.

If you can find a stock Mazda Cosmo 3 rotor EFI somewhere in the
world you probably could get it to work with Perry's help.
Maybe not a p-port. My 3 rotor has a chopped of wiring harness
and no computer.

There are several off the shelf after market EFI systems for around
$1000 and up. The question is will they work with a 3 rotor and without
O2 feed back?

IMHO I would go with this system as it is large company with
a lot of R&D money. Most likely to be bullet proof.

http://www.jegs.com/p/DFI/Accel-DFI-Thruster-EFI-Engine-Management-System/981841/10002/-1
http://www.hotrod.com/howto/113_0504_standalone_efi_systems/index.html
http://www.accel-dfi.com/CatalogsList.aspx

There are others used in Formula 1 racing and elsewhere but if you
have to know the price you  cannot afford it. They all take a huge
effort to get them to work for our needs.

Megasquirt is probably the most flexible and adaptable because the
software is open source therefore the hood is not welded shut.
Anybody can work on it, change it and fix it.

However Megasquirt requires a much more difficult
to learn programming language than grammar school BASIC :)
One can write BASIC programs ten times faster as the
computer does a lot of the programming work. ZBasic
is a bit deficient in that regard compared to QB.
QB is a true high level language.

None of these EFI systems  are auto tune as far as I know. You tune
them by changing values in a look up table uploaded to a PC and then
downloaded to the unit. Probably easier than tuning Tracy's system.

I am going forward on the open source Atmel/AVR ZBasic in competition
with Megasqurt as I believe it is much easier and way faster to learn to
program in ZBasic. I also believe EGT auto tune will work with
no look up tables. As usual I am 20 years ahead of my time :)

BTW don't get too in love with QB as it runs on DOS so it is
limited in certain ways. However on the up side DOS was
as close as anybody has come to a good real time OS.
I loved QB and DOS for that reason. I could up date my AC GPS moving
map system in one second back in 1990. Micro Soft destroyed all that and
changed to VB which really is just a selling tool for Windows.

Back in those days I was advocating up grading DOS and QB to a true
32 bit OS but nobody payed any attention :) Those of us in the
know predicted a lot of problems with Windoz which came to pass and
are still happening. Linux is a lot better.

Multitasking is nice but for a lot of dedicated applications
it is not needed.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.