Paul, I know you're focused on the engine controller, but I recall a while
back you mentioned the possibility of a run
of wiggens couplings. Did this happen, was there not enough interest or did
I miss it?
C. Smith

Jeff Might be interested. He has an NC lathe now.

Jeff, these things cost $100 each if you have to buy them from the race car
suppliers.


Paul Lamar
--
Jeff
  You can put me down for a few also if you decide to make them.

Mike C.


What size tube/pipe would they fit if you did make some?

Jay

It will bond on 1 3/8 OD and tig weld to 1.5 inch tube.

An ordinary worm hose clamps keeps the two parts together.
Nothing fancy.

These are the most reliable couplings you can get.
Widely used in airliners and cost no object Formula 1 cars.

Paul Lamar