Paul, I know you're focused on the engine controller, but I recall a while
 back you mentioned the possibility of a run of wiggens couplings. Did this
 happen, was there not enough interest or did I miss it?
 C. Smith

 Jeff Might be interested. He has an NC lathe now.

 Jeff, these things cost $100 each if you have to buy them from the race car
 suppliers.


 Paul Lamar
 --
 Jeff
  You can put me down for a few also if you decide to make them.

 Mike C.

 I would take a couple more, for spares.

Mark S.

I can send you the stp file Jeff.

Paul Lamar