Subject: 13b P Port rebuild
From: Rotary Engine
Date: 6/20/2010, 4:17 PM
To: AAA Put this in the To box



The second rotor housing also is holding 60psi

I have painted the iron housings.

I am getting ready to assemble the 13b P Port and was wondering if there
were any recommendations on what needs to be replaced as a matter of
precaution.

I plan to use a rebuild kit with Mazda stock apex seals, change out the oil
pump drive chain. What else should be a must change?  I will do the mods on
the Turentine video.

What precautions should be taken for storage after assembly if it is not
started for a year?

Thanks for any help

Joe Berki
Limo EZ

I would get a set of TES seals from Creavey.
http://www.rotaryeng.net/O-ring-size2.html


Paul Lamar


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.