Paul
I finally found this info from a retired engineer that I met at
SnF a few years ago. Tried to find on the Panacea-bocaf.org
website but couldn't find (too much other good info) Please
browse this attachment and comment. - could plazma spark plugs
work and improve rotary BSFC? I also have another source from
this engineer about a water car, where the inventor is using the
stock distributor/coil and running on board inverter 110v to the
plugs (I remember he was using relays to fire the plugs) if you
want to review. He was apparently running 100% water through the
re jetted carb on a 350 Chev Camaro. Ran great after the water
was warmed up by the exhaust heat.
Dan F
If you put enough power into the "plasma injecting spark plug", along with water from the manifold, you end up with an
electricity fueled steam engine!
Kinda inefficient if you use batteries to power it, though :-)
Craig Taylor
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.