Paul
I finally found this info from a retired engineer that I met at
SnF a few years ago. Tried to find on the Panacea-bocaf.org
website but couldn't find (too much other good info) Please
browse this attachment and comment. - could plazma spark plugs
work and improve rotary BSFC? I also have another source from
this engineer about a water car, where the inventor is using the
stock distributor/coil and running on board inverter 110v to the
plugs (I remember he was using relays to fire the plugs) if you
want to review. He was apparently running 100% water through the
re jetted carb on a 350 Chev Camaro. Ran great after the water
was warmed up by the exhaust heat.
Dan F
That 5 meg pdf is too big to publish Dan.
Paul Lamar
.
Paul
Dang, probably better anyway.
http://www.google.com/search?q=plazma+spark+plugs&sitesearch=panaceauniversity.org Lots of work being done, the
current experimenting is that a plazma spark
(almost a jet really) will light off very lean
mixtures, allow diesel in a gas engine, or high
amounts of water injection to double fuel economy.
http://www.panaceauniversity.org/The%20Nexus%20Files.pdf
is a quick primer for one system
Since our problem is to get better fuel burn,
could a plazma jet be the easiest way to better
power and economy?
Dan F
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.