Subject: 2-stroke oils are not all alike
From: Rotary Engine
Date: 7/4/2010, 12:10 PM
To: AAA Put this in the To box



Paul,

I have learned recently that there are at least two quite different
types of 2-stroke oils widely sold widely. One maker (Amsoil) offers 5
different 2-stroke oils. As best I can make out, there are oils for
outboard motors (water-cooled, running at low temperatures)
specification TC-W3 by the NMMA. And there are oils for chain saws etc
(air-cooled, running much hotter) specification ISO-L-EGO or ISO-L-EGD
or JASO-FC or JASO-FD. And there is API-TC which fits in there somewhere.

http://www.amsoil.com/StoreFront/hpi.aspx
http://en.wikipedia.org/wiki/JASO_FC

API is, I think, American Petroleum Institute and NMMA is National
Marine Manufacturers Association) and JASO is Japanese Automotive
Standards Organization and ISO is probably the Internation Organization
for Standardization. So these are overlapping standards by different
organizations. But the difference between high temperature and low
temperature 2-stroke oils is, I suppose, quite real. It is insisted on
by people who service outboard motors.

Are these oils are all acceptable for Mazda Wankel engines or which are
preferred?

Al Rees

We have been using the Walmart liquid cooled 2 stroke oil
but Idemitsu is now selling premix specifically
for the rotary. I use their rotary racing oil in my
RX8. 1/4 ounce per gallon to supplement the stock oil
metering pump.

http://www.idemitsu-usa.com/

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.