Does anyone have recommendations on
   terminating cooling
  lines?  Should the
  diameter be 1 1/2" ?  What type of
   fittings? I have to
  fit some sort of
  adapter between the front housing and the
   toyota water pump
  to connect the
  pump to the two eliptical holes where the
   old water pump
  lived..

  Does anyone have a 93 to 95 oil pan that
   they want to part
  with?
  Joe Berki
  Limo EZ

  1 and 3/8th minimum.

  Paul Lamar
  Joe

    I have one; rusted but not beat up. Do you want a
  pic?

    Robert


   Robert,
   Yes, send a pic and price

   Joe


  Joe

  Make me an offer. Where is it shipping to? I seem to
  recall
  the hole pattern is different from 2nd to 3rd gen, but
  don't
  recall the details.

  regards Robert


  Joe

Here's pix for the 3rd gen pan; and it's not as rusted.

regards Robert


Robert and Paul,

After seeing a picture of the 93 to 95 pan it will be easier to modify the
2nd gen pan to fit the 3rd gen front cover installed on the 2nd gen
housings.  I finally got the Toyota water pump and it looks like I will have
to remove some of the web on the 3rd gen cover just to make enough room.  So
I will look at cutting the CAS mount out of the 2nd gen cover,  The 3rd gen
cover has some nice mounting points for ignition trigger stuff but i wonder
if that could be done at the flywheel.  some guys running Klauses ignition
on lycomings have had the alternator belt take out the electronic ignition.

Picked up a radiator from Summitt Racing but have to open up the frame to
make it fit.
It looks like the details are fitting together with less hastle than I
imagined.  I appreciate you taking the time to get me the picture.

Joe Berki
Limo EZ
13b P Port