Paul,
In recent emails you have noted the potential advantages of water cooled (water
cooled per SAE paper 900035) eccentric shafts.
I am trying to remember the thermal characteristics of oil vs. water/anti-freeze
and I can't. I do know a generation back or so, some Suzuki sport-bikes were oil
cooled via a radiator.
Is oil thermally at a disavantage over water?
If you went with water and ceramic bearings could the bearings be cooled
via water and anti-freeze like the early 80's Chrysler turbo-Daytona did?
Note I am not sure that was a success to mirror, however I had the pleasure
of attending a Taurus SHO kick off a year ago and the vendor display of the
turbo had oil lube and water cooling in the turbo housing to keep the overall
housing temps stable. Interesting concept to keep the turbo cool.
My best,
Anthony
A lot of of turbo's are water cooled including the stock Mazda RX7 versions.
I think the problem is the heat transfer coefficient or conductivity from
metal to the oil is not as good as metal to water. This problem manifest
itself in two ways. In the engine from metal to oil and from the oil to the
radiator or oil cooler metal.
Lighter weight oils such as 5 weight seem to work better. The RX8
manual recommends 5 W 30 as I recall.
The bottom line is one must measure the metal temperature and
not the coolant temperature alone.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.