Hi,
It seems that this product could be useful for gearboxes, maybe for
rotaries too.
http://www.rvs-tec.com/English/index.htm
Test results indicate that gear teeth roughness get below 1 um Ra, like
in vibratory (ultrasonic on abrasive bath) finishing. It also creates
ferrosilicate coating that is hard and has less friction.
I was a bit worried how this behaves on chrome plating, but it seems
that it adheres to iron-containing surfaces only. Don't know if that
applies to nitrided surfaces on side housings.
Cheers,
Petri
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.