Paul,
This is directed at George Grimes because of his data loss due to a
Windows failure. This is to help you recover your valuable data off
of a Windows disk (assumes the mechanics of the drive are
functional). Use a borrowed computer (friend or family) that you
can burn a CD, and download this
ftp://ftp.oss.cc.gatech.edu/pub/linux/distributions/puppylinux/puppy
-5.1/ (lupu-510.iso file) Burn to a blank CD using the iso or image
option on your favorite CD burning software. Then take the disk and
put in the computer with the crashed Windows drive and set the bios
to first boot off of the CD drive. You can avoid doing this by
pressing the F12 or F11 key and choosing to boot off of the CD drive
if you like. Just pick the default options, (keyboard, date, video,
etc) and you should boot up to a Puppy Linux desktop. Have a
portable USB drive plugged into the machine or a large thumb/flash
drive, if you have a limited amount of data. You will see your
Windows "C" drive show up at the bottom left of the screen as sda1.
Other drives will have similar names. Click on the drive and look
for your data. You can then copy to your external drive and save
your data. I hope this helps with data recover for you guys. Please
back up often as I know how much time you have in your work. Email
me if you have questions.
Jim Brewer
P.S. Puppy Linux will extend the life of those older computers and
keep you virus/spyware free. It can be carried in your pocket on a
flash drive to boot off of and store your work.
Paul & Group -
Also you can try putting a hard disk in the freezer , in an antistatic
bag - with plenty of silca gel bags around it - for about 20 mins.
This sometimes restores the functionality of the drive mechanics. If
you have an identical HD you can sometimes transfer the circuit board
over or try setting it as the slave drive, as the controller is on the
drive with IDE - ATA and SATA.
The other trick is restoring the partition table using particular
forensic and utility software. There are special forensic
distributions of linux you can download.
Fly & Build Good -
Mr.Bryan Wilkinson
Jim Brewer, thanks for the advice. I have several types of CD bootable
Linux distributions but hadn't thought of recovering windows mischief with
Linux. The main problem was getting Microsoft to recognize my product keys
of which I had two that were declared valid. Like nailing jello to the wall.
They will refund the price of the windows 7 ultimate which can't be returned
to the store since it had been installed and registered. It just wouldn't
run my software ( message was it is incompatible). Eventually I did an
install without product key so it would run for 30 days to recover the data.
I had tried adding this SATA drive to my back up computer fo file recovery
since it had an operating system intact. The system-check-exception error
kept randomly shutting down windows and no real progress was made in 3
hours.
Yesterday I downloaded 9 file recovery programs several free-ware and
some demos just to see if one was worth buying. The first one I tried was
"Recuva" which is free. There is a video on you-tube that some girl techie
posted. It was installed on a CD and ran with no surprises. Much Joy!! The
only unplesant thing was that my X-Plane simulator was on this drive (once
with scenery and one with just the rest) This amounted to 123GB of files. I
tried using the filters but didn't know what to use for the meshcam files.
Eventually I did the deep scan with file directory recovery. It ran for
about four minutes and displayed 234,067 files. This time was on a 3.4Ghz
quad core liquid cooled processor which didn't act the least bit loaded. The
Recuva screen cautioned it could take hours, but ALL the files were
displayed in under 4 minutes. From 9PM until 3:30 AM I slowly scrolled
through every one of them selecting everything I hoped to find and a few I
had forgot I needed to rescue. They are now recovered and burnt to CD's. I
would highly recommend :RECUVA" with the installed .exe file only 1.81 MB it
should be on our hard drives just as insurance from windows going off
reservation. One more thing of note. After recovering the selected files I
opened windows explorer and found the entire file tree restored with all the
files I selected back in their original locations. Windows had deleted most
of the folder names leaving only inoperable software and a folder where I
import software to install. I bought a couple new 1Tb western digital drives
for the computer but before pulling out the present drive I want to run
Recuva again with an *.afl filter because all the X-Plane propeller and wing
airfoils were separated out of their folders last night and would be an easy
addition to my airfoils database for the simulator.
Brian Wilkinson, Thet is a good tip about setting a troubled drive to
slave behind another master to regain control. I have gotten lazy and been
setting them to cable select if there are jumpers to set. I usually buy
drives in pairs and save one as back up to ease moving programs and the
operating system if it becomes necessary. When the local Auto Cad dealer
disappeared without notice he had been sellng the licences without install
CD and charging for reinstalls.The licence allowed downloading updates from
Auto Desk but I decided any software without the DVD was a no sale in the
future. I cloned my drive to it's twin and used majic iso to get to each
larger hard drive. Now I bought Rhino4 which comes with the DVD set and if I
need Autocad I just drag the old box off the shelf and set it up. I
personally have never had a hard drive failure even dating back to when a
40Mb Connor was the standard consumer HD. They get replaced with larger
capacity drives because C++ programmers have no restraint on file creation
causing the software to take up the whole drive with each new release.
george grimes
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.