http://www.autoblog.com/2010/08/30/mazda-shinari-concept-debuts-new-face-of-the-brand-in-style/
Mark Steitle
I hope so but here are a few suggested improvements.
If Mazda builds it it will be road raced. These aerodynamic
modifications are essential as a lot of racing classes do not
allow after market body modifications.
Paul Lamar
It would only work as an RX-9 if it had a three rotor. Would make a
great BMW 5-series killer. But I wish it had a greenhouse.
jd
Paul, And its a 4 door! If they built a 3 rotor version of a 16B
wouldn't that be 2400 cc? With that power to weight ratio their racing
season would be one race no mater how they classify the displacement. Might
as well put sequential turbo charging on as well since there is nothing to
loose at that point. Stock car racing outlawed the Dodge hemi and Ford super
cobra jet ( the Ford before the Daytona 500) as well as two stroke and gas
turbine engines before they were built. If we get 250 HP per rotor with a
P-Port that should be about 830 Hp for a race version 3 rotor NA engine. No
telling what a 24B could make.
It would be nice to be able to get all new aluminum 3 rotors at OEM
pricing to put in aircraft but if they aren't allowed to race them would
Mazda continue to build them.
george grimes
A 13B 2 rotor is 2.6 L. RX8 intake manifold is 250 HP at 8500 RPM.
A 16x 2 rotor is 3.2 L. RX8 type intake manifold is ~ 300 HP at 8500 RPM.
A 20B 3 rotor is 2.6 + 1.3 = 3.9 L. A P-port is about 450 HP at 10,000 RPM.
Not likely to make that much in a street car. I would say more
like 330 HP but lots more low RPM torque than a 13B or 16x.
All normally aspirated. 25% to 30% more HP for turbo compound.
Now if they use my idea for a trap door P-port they may get
close to 400 HP NA or more in the 3 rotor street version :)
http://www.rotaryeng.net/RX8-p-port.html
What they really need now is a Formula 1 type transmission with
super fast paddle shifter. That would make the RX8 a lot more
fun to drive. It would be a blast to drive. It would also help the
16X and the 20B. The rotary engine comes alive after 6000 RPM.
Mazda is racing the 20B 3 rotor in RX8's in the Rolex GT race. In fact
They dominate the entries with 7 or 8 and usually either win or
finish on the podium. P-ports are outlawed in SCCA racing as
being unfair to piston engines. Stock 13B RX8 engines are
used in Star Mazda open wheel road racing. Typically 30 or more
cars in each race.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word PaulLamar2
Copyright 1998-2010 All world wide rights reserved.